As an important part of the machine tool, LED Machine light plays a vital role in the operation of the machine tool. LED Machine Light is divided into Signal Tower Light and ordinary light, their respective functions and use of different methods, but all need to carry out regular repair and maintenance to ensure the normal operation of the machine tool. In this article, we will share the experience of using Signal Tower Light from the perspective of repair and maintenance.
First, the maintenance of machine tool Signal Tower Lights
Signal Tower Light is commonly used in the machine tool indicator, usually used to show the operating status of the machine tool. If the machine tool Signal Tower Light failure, the need for timely maintenance.
1. Check whether the power supply is normal
Signal Tower Light needs to use power supply, if the power supply failure, will lead to the machine tool three-color light can not work properly. Therefore, first need to check whether the power supply is normal.
2. Replace the bulb
If the Signal Tower Light bulb is damaged, it needs to be replaced in time. When replacing the bulb, you need to pay attention to the specifications and voltage of the bulb, so as not to cause greater problems.
3. Clean the bulb
If the light bulb of Signal Tower Light is too dusty, it will also affect its normal operation. Therefore, you need to regularly clean the bulb to ensure its normal work.
Second, machine tool Signal Tower Light maintenance
Signal Tower Light maintenance is equally important, it can extend the service life of the machine tool three-color light, to ensure the normal operation of the machine tool.
1. Regularly check the power supply
Regularly check the power supply of Signal Tower Light to ensure its normal operation. If the power supply is found to be defective, it needs to be replaced in time.
2. Avoid dust entry
Signal Tower Lights are usually located inside the machine tool and are susceptible to dust intrusion. Therefore, you need to regularly clean the inside of the machine to avoid dust entering the Signal Tower Light.
3. Use the machine correctly
Proper use of the machine tool can reduce the damage of the Signal Tower Light and extend its service life. For example, in the operation of the machine tool, should follow the operating procedures, do not overload the machine tool, do not put your hands inside the machine tool.
In short, the Signal Tower Light as an important part of the machine tool, its repair and maintenance are very important. Proper use of the machine tool to avoid damage to the Signal Tower Light can ensure the normal operation of the machine tool.