Machine Tool Warning Lights are a common type of machine tool warning light used to indicate machine tool operating status and fault conditions. Under normal conditions, the Signal Tower Light should illuminate red, yellow and green at the same time. If only one color light is on, it means that the machine tool has a corresponding fault. The following will be described in detail Signal Tower Light only a color bright possible reasons and their solutions.
First, machine power failure
If the machine power failure, Signal Tower Light only one color on. At this time, you need to check whether the machine's power plug is loose, whether the power cord is damaged, whether the machine is overloaded or short-circuit conditions. If the power cord is damaged or overloaded, you should replace or adjust the power cord or check after power failure.
Second, the machine tool controller failure
If the machine tool controller failure, the Signal Tower Light only one color on. At this time, you need to check whether the machine's controller is abnormal, whether the controller's relay is burned or faulty, whether the controller's motherboard is short-circuited and other issues. If there is a failure, you need to replace or repair the machine tool controller in a timely manner.
Third, the machine tool mechanical failure
If the mechanical part of the machine tool failure, the Signal Tower Light only one color on. At this time, you need to check whether the various parts of the machine's movement is stuck, damaged or loose and so on, whether the machine's transmission chain is faulty and so on. If there is a failure, you need to repair the mechanical parts of the machine in a timely manner.
Fourth, the machine tool electronic component failure
If the electronic components of the machine tool failure, the Signal Tower Light only one color on. At this time, you need to check whether the electronic components of the machine tool is short-circuited, burned or malfunction. If there is a failure, you need to replace or repair the electronic components of the machine tool in a timely manner.
In short, Signal Tower Light only one color is a machine tool failure performance, you need to check and repair in a timely manner. If you are not sure of the cause of the failure and the solution, it is recommended to contact the machine tool manufacturer or maintenance personnel in time to deal with.